BTL Advanced Setup window
ADVANCED SETUP
Modified on: Sun, 8 Aug, 2021 at 6:32 PM
Advanced Setup
Element Identification and Mark – select element identification and marking configuration. This goes to advanced settings where you can predefine marking for plates/rims joists, girders, studs, joists and columns. Also you can make special element filtering.
Print Stud/Plate Mark on Right/Left/Outer/Inner Side of Frame
Print Stud(Joist)/Plate Mark on Right/Left/Outer/Inner Side of Frame – select if Mark value has to be printed on right/left/outer/inner side of frame element. Mark value is predefined in Mark tab.
Example, Mark value is printed on the right side of Joist:
Print Stud/Plate Position Mark on Connected Element Right/Left/Outer/Inner Side of Frame
Print Stud(Joist)/Plate Position Mark on Connected Element Right/Left/Outer/Inner Side of Frame – select if
Position Mark value has to be printed on right/left/outer/inner side of frame element. Position Mark value is predefined in Position Mark tab.
Example, Position Mark value is printed on the outer side of Joist:
Stud/Plate Position Lines on Connected Elements
Print Stud(Joist)/Plate Position Lines – select if position lines has to be printed on the frame.
Example:
Mark, Module Mark, Position Marking, Annotation tabs
Mark, Module Mark, Position Marking, Annotation tabs – predefine rules for filling Mark, Module Mark, Position Marking and Annotation values in the exported file.
Available parameters come from framing element instance properties.
Example, Mark is filled CNC Part Name and CNC Part Number and printed on the frame. Also Position Marking, Module number, Annotation values are written to CNC file and visible in the free viewer:
Element, Wooden Details Filtering
Last updated
