Getting Started
Prepare Toolsets for Workflow
Each tool must be prepared before you can start working on Curtain Walls and Panels in Revit. Below you will find a step-by-step guidance.
STEP 1. Download sample files
These sample files will be used for setting up each toolset. You should download these files and save them in a convenient location on your machine:
CWP Configurations - folders with 3D modeling and documentation automation rules:
· ConfigsWall+M - Configurations for Wall+M tool
· ConfigsSmartConnections - Configurations for Smart Connections
· ConfigsSmartViews - Configurations for Smart Views
CWP Families (Metric only, imperial soon to be included) - folders contain default ventilated facade families to get you started:
· Generic Models – Metric
· Structural Framing – Default mullions, transoms, gaskets, cover caps and other profile elements
· Structural Connections – Profile hangers and other fixings (imperial soon to be included)
· Titleblocks – A1 sheet template for documentation (imperial soon to be included)
Revit model (Metric only, imperial soon to be included) - Sample Revit project that will help familiarize with the Curtain Walls and Panels solution
STEP 2. Extract files
After downloading all folders. Here's an example with the CWP Configurations.zip file. Select and extract all files using the Extract all button:
STEP 3. Open Revit project
Open a new, empty Revit project.
IF YOU WANT TO PRACTICE WITH OUR SAMPLE REVIT PROJECT, THEN SKIP STEP 4.
STEP 4. Load families
After extracting CWP Families ZIP file, copy the CWP Families folder file path:
Go back to Revit and find Wall+M tool. Open the Load Families dialogue:
Paste the file path at the bottom slot:
Before clicking OK, make sure to tick the box under the lower Load column:
STEP 5. Setup configurations
Each tool has unique automation rules (aka configurations). Each tool configuration set has files with written codes. These files should be mapped with each tool.
Follow the steps below (in any order).
Wall+M
Open ConfigsWall+M folder and copy the file path name:
Go back to Revit and find Wall+M. Open Configuration Files' Location dialogue:
Paste the file path:
Smart Connections
Open the ConfigsSmartConnections folder and copy the file path name. Then go back to Revit and find Smart Connections tool. Open Configuration Files' Location:
Paste the file path:
Smart Views
Open the ConfigsSmartViews folder and copy the file path name. Then go back to Revit and find the Smart Views tool. Open Smart Views Configuration Files' Location:
Smart Views (Smart Dimensions)
You should also copy the file path for the dimensioning rules. Part of the file path is found in Wall+M configuration folders:
Metric: [...]ConfigsWall+M\Shop Drawing Configurations\Dimensions\Metric
Imperial: [...]ConfigsWall+M\Shop Drawing Configurations\Dimensions\Imperial
Go back to Revit and open Smart Dimensions Configuration Files' Location:
Paste the file path:
Last updated
